High Stability Accuracy GPSDO GPS Disciplined Oscillator LCD Display GPS Beidou

Description

TM5301A GPSDO GPS Disciplined Oscillator with Color Display High Stability Accuracy For GPS & Beidou
Color Screen Display:
- Satellite reception status: visible satellites and available satellites
- Date and time: UTC date and time (default time zone +8)
- Frequency accuracy measurement: use the reference signal provided by GNSS to estimate and measure the frequency accuracy of OCXO
- Display the current status of the device
Features:
- Built-in high stability SC cut OCXO
- Color screen displays equipment operating status
- Stable in seconds: <2E-12
- Near-end phase noise: <-100dBc at 1Hz
- Output: 2 channels 10MHz square wave (3.3V), 2 channels 10MHz sine wave (1.5Vpp), 1 channel 1PPS (3.3V)
- Positioning timing: high-precision BDS+GPS dual-mode receiver, timing accuracy <20ns, positioning accuracy <1m
- Power supply: +12VDC, power consumption <5W (at 25℃)
Package Standard Accessories:
12V/1A Power Adapter:
- Input: 100-240VAC, 50/60Hz, 400mA Max.
- Output: 12VDC, 1A
USB Cable:
- Connector: USB2.0 Type-A to Micro-B
- Length: 1 meter
GNSS Satellite Antenna:
- Mode: GPS/BDS dual mode
- Feeding: 3-5VDC
- Cable length: 5 meters
* Frequency Accuracy Measurement Confidence Level:
Limited by the accuracy of the reference signal of the GNSS receiver, the confidence level of the equipment for frequency accuracy measurement and estimation is as follows (Ta is observation time):
<+/- 2E-8 @ Ta = 1s
<+/- 2E-9 @ Ta = 10s
<+/- 2E-10 @ Ta = 100s
<+/- 2E-11 @ Ta = 1000s
<+/- 1E-11 @ Ta = 2000s
Rear Panel Interfaces & Indicators:
Interfaces:
Output:
* 10MHz (square wave): 2 outputs, ultra-high-speed 3.3V LVCMOS, phase difference between channels <50ps, rising edge <1ns (<700ps, typical value)
* 10MHz (sine wave): 2 outputs, 1.5VPP@50 ohms
* 1PPS (timing pulse): 1 output, 3.3V LVCMOS, active on rising edge, positive pulse width 100ms
Input:
* GNSS Antenna: satellite antenna access, with 3.3V feed
Communication:
* USB: Micro-B interface, USB virtual serial port, default baud rate 115200bps, used to cooperate with software to receive GNSS positioning information and status
Note: Do not change the baud rate of receiver, changing to other rates will cause the device to work abnormally.
Power Supply:
* +12V DC: +12V DC power input, current 1A; DC 2.1/5.5 interface, internal positive and external negative
Indicator Lights:
* POWER: Power indicator
* TRACK: Track GNSS instructions, flash quickly when locked
* COM: communication indication, flashes when USB connection is successful and there is data communication
Specifications:
Package Included:
- 1 x Set of GPSDO +
Power Adapter + antenna + usb cable
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Orders will be processed and dispatched within 3 days normally
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international import duties.
2. Import duties,taxes,and charges are not included in the item price or shipping fee.
3. The import duties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the import duties will be submitted to eBay for solution.
Feedback
Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.Thanks!
Contact Us
We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.